Tamiya 1:48 Swordfish Mk 1 float plane

J

John Rixon

Guest
And more. The cockpit machine gun is already quite nice. But Eduard want me to cut the barrel off and replace it with theirs. Except theirs is flat. Time to invent the DIY PE rolling machine. Ok, it's a drill bit and two cotton buds (with the buds removed) but it worked.
View attachment 287650

Ending up looking like this.
View attachment 287651

If you are a bit familiar with the swordfish, you might remember this is the gun that sticks out from the cockpit then sits in a recess of the fuselage. This can make painting the fuselage a bit difficult, do by adding the new barrel later on in the build, I can avoid all that trouble - we'll see.

Tamiya tolerances can be quite tight with even a layer of paint upsetting things. So, as I prepare for priming, I've masked the cockpit mating surfaces to avoid having to scrape paint of later. It might help, it might not, again, we'll see later.
View attachment 287652

And finally, all primed. With a bit of luck (and after three fish tanks, two lawns and a bit of dead heading) I might get some colour on and maybe even a bit of building.
View attachment 287653

Right, next job, lawn mower.
Liking the look of this one, a lot!
 

colin m

Moderator
Staff member
Moderator
SMF Supporter
Joined
Dec 26, 2008
Messages
8,572
Points
113
Location
Stafford, UK
First Name
Colin
Great work on the pit Colin
And the pit is finished.
19.JPG

As is the engine. The engine is meant to be black, that's unfortunate as I do like my radials to be a natural metal colour, then give them a dark wash to bring them to life. However, not here, black means black.
18.JPG
 

Snowman

We come in peace, so shoot to kill!
SMF Supporter
Joined
Oct 20, 2014
Messages
1,996
Points
113
First Name
Gavin
Looking good!!:cool:
 
Joined
Jan 8, 2011
Messages
4,990
Points
113
Location
Essex
First Name
Dave
Nice work Colin. Ive had the wheeled version in my stash for years. Ive got the Tamiya photo etch rigging set for it as well. Lawrie had a lot of trouble fitting the etch, which put me off a bit. Might use fishing line instead
 

colin m

Moderator
Staff member
Moderator
SMF Supporter
Joined
Dec 26, 2008
Messages
8,572
Points
113
Location
Stafford, UK
First Name
Colin
Nice work Colin. Ive had the wheeled version in my stash for years. Ive got the Tamiya photo etch rigging set for it as well. Lawrie had a lot of trouble fitting the etch, which put me off a bit. Might use fishing line instead
Thanks Dave. Regards the rigging, I was stuck between a rock and a hard place. I wasn't sure if the Tamiya 'bars' might be too big, or if fishing line etc would look just wrong. So, I've gone for the Tamiya PE. Although I couldn't get the float plane version, so I will still be using some home made rigging on the floats.
 

colin m

Moderator
Staff member
Moderator
SMF Supporter
Joined
Dec 26, 2008
Messages
8,572
Points
113
Location
Stafford, UK
First Name
Colin
Well that's the cockpit bird cage assembly thing finished and mounted into the stbd fuselage.
20.JPG
21.JPG

I know Theuns, the dope should have been darker. I did use a dark red/leather, but I guess I went a bit too much fading it out.

This the pre-war instrument panel ready for fitting.
22.JPG

And finally, a good place to stop work for tonight.
23.JPG

The fit is tight, I suspect a tiny bit of filler will be needed in places, but it certainly isn't bad.
 

colin m

Moderator
Staff member
Moderator
SMF Supporter
Joined
Dec 26, 2008
Messages
8,572
Points
113
Location
Stafford, UK
First Name
Colin
I've been a bit busy so work on this build has slowed. However, the wife's BIG birthday is now done, normal service will resume. But I have managed to do a bit once in a while. Look carefully in the following pic, and you will see many bits of Swordfish scattered around my bench. It's a sort of 'spot the swordfish' type pic.
24.JPG
 
T

Tony

Guest
And more. The cockpit machine gun is already quite nice. But Eduard want me to cut the barrel off and replace it with theirs. Except theirs is flat. Time to invent the DIY PE rolling machine. Ok, it's a drill bit and two cotton buds (with the buds removed) but it worked.
View attachment 287650

Ending up looking like this.
View attachment 287651

If you are a bit familiar with the swordfish, you might remember this is the gun that sticks out from the cockpit then sits in a recess of the fuselage. This can make painting the fuselage a bit difficult, do by adding the new barrel later on in the build, I can avoid all that trouble - we'll see.

Tamiya tolerances can be quite tight with even a layer of paint upsetting things. So, as I prepare for priming, I've masked the cockpit mating surfaces to avoid having to scrape paint of later. It might help, it might not, again, we'll see later.
View attachment 287652

And finally, all primed. With a bit of luck (and after three fish tanks, two lawns and a bit of dead heading) I might get some colour on and maybe even a bit of building.
View attachment 287653

Right, next job, lawn mower.

I think that must be the very first time i have seen a flatey eduard gun barrel made up. I always used to think they added them to their frets just to "annoy" the model maker. You have proved they can be formed into shape.

It looks very good as well.
 
T

T. van Vuuren

Guest
No I think the red of the linnen/dope you got there is just abouth right if one remembers that the fuselage will be dark on the inside, I think you nailed the rest of the cockpit wery nicely aswell :smiling3:
Remember that the "darkness" of the dope on the inside would be directly proportional to how much they brushed on over the outside and let it seap through the fabric, if they applied it a tad "lightly" on the outside it would look exactly like that ...

Theuns
 

colin m

Moderator
Staff member
Moderator
SMF Supporter
Joined
Dec 26, 2008
Messages
8,572
Points
113
Location
Stafford, UK
First Name
Colin
A small step in the right direction.
I've started work on the torpedo. Which meant cutting off the 8 blades of the propellers to add 8 photo etch blades. Fiddly work, was it worth it ? Anyway, it's done now.
25.JPG

Speaking of propellers, the big one is done. OK, not much to look at really. I might just add a few little paint chips later.
26.JPG

But wait. Proper work. Not only have I painted the fuselage, it also stands on its floats.

27.JPG

28.JPG

No camouflage here, this is the pre war version.
 

yak face

Wossupwidee?
Staff member
Moderator
SMF Supporter
Joined
Jun 13, 2009
Messages
12,265
Points
113
Location
sheffield
First Name
tony
Excellent work colin , like most of the new airfix kits this looks like a pain free enjoyable build so far, cheers tony
 

Snowman

We come in peace, so shoot to kill!
SMF Supporter
Joined
Oct 20, 2014
Messages
1,996
Points
113
First Name
Gavin

colin m

Moderator
Staff member
Moderator
SMF Supporter
Joined
Dec 26, 2008
Messages
8,572
Points
113
Location
Stafford, UK
First Name
Colin
Well this seems to be a bit of a slow build, but here is a bit of an update. I've started work using the Tamiya PE rigging. This stuff is tough. So in the below picture I tried to attach the upper and lower wings together and glue in the first pieces of rigging. Don't do this. Connect the top and bottom wings via the struts and when all set, carefully bend the rigging into place. It will bend a long way without danger of permanently deforming. Some pieces of rigging seemed to be too long and needed shortening a tiny bit. Lots of trial fitting is the order of the day here. Also, don't try gluing both ends of the rigging at the same time. Attach one end, let it set, then glue the other end, carefully bending the rigging into place.
29.JPG

29a.JPG

And finally, one wing complete.
30.JPG

The fuselage has had a bit of work to. I haven't built many Tamiya kits before, but these decals lived 'down' to Tamiya's reputation for thick decals. They were a bit of a pig. To be fair, the large blue decal does have to conform to quite a rough surface. I'll either touch this blue bit up, or call it wear and tear !
31.JPG
 
T

Tony

Guest
That looks very smart.

I think that tamiya etch is steel rather than brass very similar to what Dragon used to add to some of their kits.

I found it more difficult to work with but yours has turned out really well.
 

colin m

Moderator
Staff member
Moderator
SMF Supporter
Joined
Dec 26, 2008
Messages
8,572
Points
113
Location
Stafford, UK
First Name
Colin
I found it more difficult to work with but yours has turned out really well
Ah well Tony, no you are quite right, it is difficult to work with. But maybe being steel (which I hadn't realised) is why it bends so well without deforming.
 
R

Rupert Carss

Guest
That looks really good, Colin. Which acrylics do you use?
 
Top