Bigfoot57
SMF Supporter
- Joined
- Jun 24, 2015
- Messages
- 860
- Points
- 93
- First Name
- Colin
Just finished having a fight with eduard cockpit details I honestly have to say some of those parts are to me impossible to construct the throttle handles spring to mind so I ended up whiltling down a tooth pick to the correct diameter and used that instead
One thing eduard need to do is improve on their instructions yes they show you where and what to do but they should also give you a view of the piece in place so you know you have put it in the correct orientation anyway here's the cockpit after being the application of pe it still needs a touch up to remove the roughness and bare metal but that is the cockpit finished next onto the seat
1st part of seat making some sort of steel tube that goes across the top of the ejector seat again good old tooth pick whilted down to fit
Regards
Colin
One thing eduard need to do is improve on their instructions yes they show you where and what to do but they should also give you a view of the piece in place so you know you have put it in the correct orientation anyway here's the cockpit after being the application of pe it still needs a touch up to remove the roughness and bare metal but that is the cockpit finished next onto the seat
1st part of seat making some sort of steel tube that goes across the top of the ejector seat again good old tooth pick whilted down to fit
Regards
Colin
Attachments
Last edited: