Hairspray failure... going at it again! (Hairspray 2.0)

Tyrel

SMF Poster
Joined
Nov 15, 2008
Messages
139
Likes
59
Points
28
First Name
Ty
#21
The best results I've had was to spray the base coat. Let dry overnight. Medium coat of hairspray with a dry time of no more than 30 minutes. Coat of XF2 white using water as the thinning agent. (I tried it once using Tamiya acrylic thinner with XF2 but had to work extra hard to achieve mediocre results). I then got a flat point brush and snipped the bristles off at the half way point. The majority of chipping was done using that brush. I used a couple of other ones for fine work but they only really worked good when I used water as the thinning agent. Here's a couple of examples. d1_zps9f08718e.jpg IMG_5089t.jpg