Liberation, Italy 1944

rtfoe

SMF Supporter
Joined
Apr 29, 2018
Messages
7,465
Points
113
Location
Malaysia
First Name
Richard
Top notch diorama WIP Tim,:thumb2: it's always a pleasure to see a well planned dio in the making. The end execution has been just amazing with textures and detail well thought of. You're going to give Telford some eye candy.

Your dio reminds me of one done by a famouse Japanese dio builder I met at Shizuoka. It's also set in Italy...but obviously not the same buildings and scenario.
Ital.jpg I have always been avoiding Italian campaign dios...so afraid without the right ambelishments it might look like a spaghetti western setting. I think the key is to get the right trees and hedges of the Italian landscape right.

Looking forward to the ground work phase.

Cheers,
Richard
 

TIM FORSTER

SMF Supporter
Joined
Apr 28, 2018
Messages
224
Points
93
Location
London, UK
First Name
Tim
Thanks, gentlemen.

One of my sources of inspiration was this wonderful diorama Jerry Got His by Radek Pituch.

Jerry Got His StuG final.jpg

Although his is set around Monte Casino and so further south where the landscape has more of a desert-like appearance.

There's also a useful Italian build in the book Landscapes of War. Vol.III. In fact I would recommend the whole series very highly indeed.

landscapes-of-war-voliii-rural-enviroments-english.jpg

Talking of the ground work...

There's going to be at least one small olive tree hanging over the ravine and sunflowers in the foreground. I even brought back a pot of Tuscan soil to make sure I got the colour right!
 

rtfoe

SMF Supporter
Joined
Apr 29, 2018
Messages
7,465
Points
113
Location
Malaysia
First Name
Richard
Yes olive tree and sunflowers will definitely set the scene...rubbing my palms with anticipation. Mr Radek has some really inspiring dios.

Thanks for the reference Tim. The one I refer to for my dios is Diorama Perfection 2...unfortunately its all in Japanese but picture heavy.
Ital2.jpg

Cheers,
Richard
 

TIM FORSTER

SMF Supporter
Joined
Apr 28, 2018
Messages
224
Points
93
Location
London, UK
First Name
Tim
Bringing alive the Verlinden street facade

After I had dropped the right-hand third of the street buildings I was left with a rather oddly truncated corner. It was odd for two reasons: firstly, the corner didn't actually meet the edge of the diorama, secondly, the windows were too close to the edge to appear realistic.

Church in place after scribing DAS.jpg

The answer was to add a corner.

This I accomplished with a fillet of balsa wood covered with Das clay (applied, as always, over copious amounts of PVA). Once dry, this was then scribed (using a metal rule to ensure that everything was straight) with my dental tools so that, as far as possible, it blended with the original facade. To help give a three-dimensional effect, once the brick or stone course was marked out a relatively blunt scalpel blade was used to 'round off' each horizontal and vertical line.

In the image below you can see the finished courses at the bottom and work in progress above.

1526944101753.png

Eventually (I hoped) you would not be able to tell where the Verlinden facade stopped and the extension began...

1526944509874.png

Further Das was later added on top where I wanted the plaster render to remain intact.

1526944587112.png

20161021_152253.jpg
Even though there was an odd angle created by the edge of the diorama, I decided to carry on the illusion of the corner a little around the right-hand side so that anyone looking at it from this direction wouldn't have their view interrupted by a blank, black wall.
 

TIM FORSTER

SMF Supporter
Joined
Apr 28, 2018
Messages
224
Points
93
Location
London, UK
First Name
Tim
The Verlinden set comes with a substantial amount of resin bits and pieces, including a balcony, windows, doors, shutters and even some small roof sections.

1526996980719.png

However, in the end the only parts I used were the balcony and the window frames.

Here is a shot early on in the build with the balcony in place and the windows (which haven't yet been sanded down to remove the excess resin) temporarily installed.

1526997103380.png

The balcony is going to be especially important because one of the little vignettes I have planned for this diorama will be bella donna leaning over the balustrade to welcome the liberating Tommies. The figure I will be using is one of the excellent resin castings from that French manufacturer MK35. I am going to adapt her pose a little and I will probably replace the bunch of grapes with a bottle of vino.

1526997272719.png

One of the rooms for which I planned an interior was the one on the lower right-hand side. Before I closed up the end of the buildings I added a simple staircase which I hoped would be visible in the gloom.

This a very simple, cheap but effective kit from RB Model. Because it is made from real wood I used wood stain to colour it before installation.

1526997568167.png
1526997589292.png


1526997618983.png

The flight was actually too tall for my room, so I cut off the top three steps and used them in my bell tower.

In due course I was to add more details to the interior so that it currently looks like this:

Interior 1.jpg
 

TIM FORSTER

SMF Supporter
Joined
Apr 28, 2018
Messages
224
Points
93
Location
London, UK
First Name
Tim
The next part of turning my Verlinden Italian street facade into something more three dimensional involved adding stone texture to the other side where the houses adjoin the church. I was getting the hang of working with Das clay. The trick when making larger sections of wall is to press the clay as flat as possible onto a metal baking tray and then transfer it piece by piece to the wall (using PVA glue first to make sure it sticks).

As before, once the clay had dried I scribed it with my metal 'dental' tools and a scalpel blade.

The small window was almost an afterthought - but it adds interest to an otherwise rather plain section of wall. Who knows, I may have a somewhat frightened German peering out as the Allies swamp the town! The surround was made from Magicsculp...

1526999721925.png
1526999761900.png
1526999776468.png
 

TIM FORSTER

SMF Supporter
Joined
Apr 28, 2018
Messages
224
Points
93
Location
London, UK
First Name
Tim
Less boring doors

The resin doors which came with the Verlinden Italian street are fine as far as they go - but a little 'old school' in their wood texture. Plus, they look too crude and, to be honest, a bit boring. The doors I photographed in Tuscany were often time-worn, but always interesting...

1527000246988.png
1527000262504.png

Like everything else in this build, I am revisiting skills I last practised as a teenager. In those days I made doors like these out of thin balsa wood. These days you can also use thin basswood. However, although this has a great texture (it is wood after all), it is difficult to cut precisely - and it has a tendency to split along the vertical.

So, I turned to my trusty friend plastic card. Using a single piece for both sets of doors, I built up the reinforcing wood pieces from thinner card cut to size. Texture was added using a compass point and the edges rounded a little with a knife.

Here are the first pair:

Doors 1.jpg

1527001280035.png

The spy hole is from an old Verlinden PE set (I later recessed it into the door). I also added some nail holes and a rough keyhole.

1527001317646.png

I had also sanded away the plaster cast detail above the doors and replaced it with a grill from photo etch. There was also a cherub face moulded into the facade, but the detail was poor so I replaced it with a lion's face carved off an old Italeri fountain. This was textured with Mr Surfacer.

1527001358511.png

Once everything was painted I was happy that they looked the part.

Church door in 2.jpg

The second set of doors were made in a similar manner, but this time I decided to add some circular 'peepholes'. These were made using a large hole punch and then detailed with some etch taken from the middle of an old Verlinden railing set:

1527001532709.png
1527001550855.png

These doors will be shown opening inwards and so they were eventually separated. And after a little paint...

20180522_183951.jpg
 
Last edited:

TIM FORSTER

SMF Supporter
Joined
Apr 28, 2018
Messages
224
Points
93
Location
London, UK
First Name
Tim
I've been able to do quite a bit of work over the half term...

Here's a couple shots of where I am in 'real time'.

With all of the groundwork now covered in terracotta Das clay, it's good to see the back of the yellow insulation board at last...

IMG_1721 corected.JPG

Although it's a bit early, I decided to give the edge a coat of black acrylic to see how the colours would look with the contrast. But please note, the ground work has NOT yet been painted.

Edges painted 1.jpg
 
Joined
Apr 28, 2018
Messages
93
Points
18
Location
Hertford, UK
First Name
Marcello
Tim,
this is a fantastic duo. Being Italian and having spent vast majority of my youth between Tuscany and Umbira, I really appreciate how accurate your buildings are.I f I have to find a minimal mistake (relatively speaking and easily forgettable), the civic number of the house is not very accurate of the era. But it will go perfectly un-noticed. Excellent job
 

TIM FORSTER

SMF Supporter
Joined
Apr 28, 2018
Messages
224
Points
93
Location
London, UK
First Name
Tim
Thanks Marcello!

I particularly appreciate any praise (or criticism) from those who are more familiar than I with the Italian landscape.

Like the overly elaborate church doorway I will just have to put the number plaques down to 'artistic licence'..!
 

TIM FORSTER

SMF Supporter
Joined
Apr 28, 2018
Messages
224
Points
93
Location
London, UK
First Name
Tim
The roof tiles

Soon after I started this project I came to realise that one of the biggest challenges that lay ahead was going to be the roof tiles. Many Mediterranean houses - and certainly, from what I could see from photographs, almost all Italian ones of the WWII era - had a distinctive style of terracotta roof tile with a curved profile slightly tapering to their bottom end.

1528497255923.png

At first I could find no source for these tiles in 1/35, but then I came across these moulds sold by Diorama Debris:

1:35 Scale Spanish Barrel Roof Tiles Mould (1350047) from http://www.dioramadebris.co.uk/135-scale-spanish-barrel-roof-tiles-mould-1350047-50-p.asp

To my knowledge, this is the only way to make these tiles in the authentic manner out of real terracotta plaster. I tried one of these moulds and, after a bit of practice, it worked very well. But it was very time-consuming. By a stroke of luck I happened to mention my dilemma to someone at a model show and - hey presto! - he came up with a supply of ready-cast tiles (I believe made from the same moulds) at a very reasonable price. I'm not sure he is still making them, so I won't name him for now. Let's just say that I was a very lucky guy because - as you will already have seen - I needed hundreds of the things..!

Making the actual roof structures themselves was hardly easy either. Because I had plans to add interior lighting and other details, I needed to ensure that each roof was removable - and strong enough not to warp once in place. The answer was to make a false internal structure out of foam board that slotted into each of the buildings. To this I then added the roof from thick card before starting to lay the tiles.

Here is the one for the main church roof...

1528497882411.png

For this roof and that of the houses I used a style which I had seen in Tuscany where the half-round tiles are interspersed with flat tiles of roughly equal width. This way I would be using half as many tiles for the same area of roof.

To give the impression of the flat tiles laid between the others I used strips of brown card laid from the bottom up with a slight overlap. The half-round tiles were then laid in rows on top of them over a ribbon of Bostick glue. This sets pretty quickly - but not so fast that you don't have time to adjust the rows if needed.

1528498143873.png
1528498179293.png

Last of all I added the ridge tiles and bedded these in with Magic Sculp to represent the render which would be used in real life.

1528498207538.png

1528498348315.png

The steeple roof, which was actually the first that I tackled, was made slightly differently.

I began by building a triangular inner frame from foam board, mounted this on a square balsa wood base and then covered the structure with thin basswood. This was glued and tacked in place to give it a slightly concave profile - a little 'sag' - and then some suitable holes for damage added. This belfry would have been an observation post for the defending Germans and thus a prime target for the Allied guns.

1528498805656.png

The tiles were laid more closely together than on the other roofs (see the reference picture above) because this crowded look seemed to suit the smaller structure better then the more widely spaced variety. For this style there are no flat tiles - only more barrel tiles laid beneath the others, but upside down (so the curve faces up).

1528499252341.png

However, rather than do this the authentic way (and thus use twice as many of my precious tiles), I cheated by adding the upside-down tiles only at the very bottom of the roof.

1528499359499.png

It's a bit messy, I admit, but - hey - this church had already stood for quite a long time before the Allies started taking pot-shots at it.

Finally, I added cement render from Magicsculp and - as a piece de resistance - a little finiale from a photo etch set called 'WEATHER VANES & PUB SIGNS' (SLOF07) made for model railways by Scale Link.

1528499926780.png
1528499947226.png

All in all, these roofs were a lot of work. But to my mind they were at least as important as the buildings that they sit above. There's just something so Italian about them! At least I hope so...

Bells installed 3.jpg
 

JR

Member of the Rabble and Pyromania Consultant
SMF Supporter
Joined
May 26, 2015
Messages
17,215
Points
113
Location
lincs
First Name
John
I find one of the pleasures of diorama building is the mission creep that inevitably occurs as the vision broadens during execution. Some really top craftsmanship here Tim, and some great ideas too. PaulE
Paul you are right on that .
Tim .
Nice to see this again , I remember those bells and the church tower roof well .
John
 
P

Polux

Guest
Excellent work!! I love the way you are detailing the entire set :thumb2:
 

TIM FORSTER

SMF Supporter
Joined
Apr 28, 2018
Messages
224
Points
93
Location
London, UK
First Name
Tim
I'm glad someone apart from me is finding this interesting!

The chimney

I decided long ago that my building needed a chimney but I hadn't really thought how to finish it. It turns out that Italian chimneys are as varied as the rest of their buildings, but eventually I came across this picture:

1528887590249.png

Well, that was all the inspiration I needed. So I set about creating my own 'mini Acropolis'.

The bricks were laid as far as possible like real bricks and fixed together using a mixture of PVA and Deluxe Materials Perfect Plastic Putty. The result is a little slap happy - and I'm not going to make any jokes at the expense of Italian builders here - but I think with a little weathering it will look fine.

The chimney 'roof' roof was built, as all my others were, using a base of plastic card, covered with brown card and then the tiles were glued in place with Bostick or UHU. And that was my last bit of tiling!

1528889674576.png
Roof and chimney complete.jpg
 

rtfoe

SMF Supporter
Joined
Apr 29, 2018
Messages
7,465
Points
113
Location
Malaysia
First Name
Richard
Hi Tim, great to see this in action again. The roof tiles are similar to the roof tiles found in the old part of Malacca town built by the Dutch after taking over from the Portuguese. You can make them from balloon rods. I've only used them for the top section of my roof building that is still being constructed.

131.jpg

Your dio is turning out to be an epic even without the vehicals and unpainted ground work. :thumb2:

Cheers,
Richard
 

scottie3158

SMF Supporter
Joined
Apr 27, 2018
Messages
12,525
Points
113
Location
Spalding
First Name
Paul
Tim,

This is a great build your attention to detail is superb. It is all those little things that make this so good. Many thanks for the descriptions and how too's.
it is not to you read things like this that you realise that half these things are possible or available. Keep it up
 

TIM FORSTER

SMF Supporter
Joined
Apr 28, 2018
Messages
224
Points
93
Location
London, UK
First Name
Tim
Hi Tim, great to see this in action again. The roof tiles are similar to the roof tiles found in the old part of Malacca town built by the Dutch after taking over from the Portuguese. You can make them from balloon rods. I've only used them for the top section of my roof building that is still being constructed.

View attachment 304983

Your dio is turning out to be an epic even without the vehicals and unpainted ground work. :thumb2:

Cheers,
Richard

Thanks Richard. I've missed the post on your dio. Can you post a link?
 

TIM FORSTER

SMF Supporter
Joined
Apr 28, 2018
Messages
224
Points
93
Location
London, UK
First Name
Tim
Tim,

This is a great build your attention to detail is superb. It is all those little things that make this so good. Many thanks for the descriptions and how too's.
it is not to you read things like this that you realise that half these things are possible or available. Keep it up

Thanks Scottie. I don't claim to be an expert and I'm always learning - usually from my own mistakes!
 
Top