Hi, the
rigging was primed with a mixture of sliver and black...the black was to dampen the shine of the silver. Then working from bottom up I glued one end as seen on previous picture, then after securing the upper wing the
rigging is thread through the pre drilled holes.
Looks like we're having spaghetti tonight dear...
Then with the help of wooden pegs as weights I secured the
rigging with a tiny drop of CA on the underside of the top wing.
When all is done I slice off what is not needed with a sharp blade...
Braces made from thin wire for the exhaust were attached to the edge of the wing.
Any traces of CA frosting was removed...
I didn't gloss enough of the top wing for decalling...there is is still traces of silvering. I just noticed the small front canopy I made from a tablet bubble cover is slightly off center.
Cheers,
Richard