Return to a stalled build

[Bigfoot57]

1/32 Lancaster Bomber Update 20

This is a milestone for me it was at this point previously where I made a complete and utter cockup and gave up the 1st time around this time I have passed this stage so here are the photos showing the engine throttle assembly I did modify the main console using a pair of staples to construct the two outer throttles in a more releastic way and a couple of bits of plastic tubing this all needs painting after it had throughly dried and set the glue

Regards

Colin

 

[papa 695]

Your doing a Stirling job Colin.

 

[Bigfoot57]

Lancaster 1/32 Build Update 21

Hello peeps sorry for lack of postings been doing a lot of fiddley stuff with nothing much to show anyway here’s where I am at present
Fitted cockpit instrument panel and engineers panel scratch built a left hand side panel where I believe 2 vhf raidios sat on the floor on the left hand side of the pilot these in turn were connected to this left hand panel and from research these varied in size shape and fittings so there is no right one to be made so I just averaged out the designs and came up with is for mine it may be rightish or completely wrong but it looks reasonable
Next I decided to add a wiring loom made from 4 strands of signal cable twisted together and tied in several places to resemble the actual cable next it will be painted grey this should enhance the look of it considerably so that’s it so far more updates to follow

Regards

Colin

 

[flyjoe180]

That's lloking great Colin. Lots of fiddly-looking detail work going on

 

[Bigfoot57]

Lancaster 1/32 Build Update 22

Still more detail being added very little structural building taking place added new inside skins on starboard side and the instrument panel in the front section of the nose tonight the bomb bay gets some attention

Regards

Colin

 

[Jim R]

Hi Colin
What a huge undertaking. Hats off to you. The man hours needed don't bear thinking about. I have seen these part-works advertised and saw a ship done on You-Tube. Fine progress so far and you will end up with a superb model of this iconic aircraft.
Jim

 

[Bigfoot57]

Lancaster Bomber MK1 1/32 Update no 23
Well I finally finished modifying the bomb bay to the best of my ability and interpretation of reference material so much for nights work it took a week never mind I have attached before and after photo’s the show the difference and it’s still in its raw state unpainted which will be the next job when it’s all set and solid

Regards
Colin

 

[Bigfoot57]

Lancaster 1/32 Update No 24

Bomb bay now fully painted and apart from the trailing wires which still need to be trimmed and put into the final fixings it’s now ready for the bomb load note the 3 sections are just pushed together not glued so you can see the whole bay
Apologies for the squashed photo appearance don’t know why it’s done that the fuselage should appear longer and more drawn out than the picture dipicts

Regards

Colin

 

[flyjoe180]

I'm still watching when I can, coming along nicely Colin

 

[Bigfoot57]

Lancaster 1/32 Update No 25
Well after a 8 week layoff due to building a formula 1 car model for the GB its now back to the Lancaster this time the first piece of the leading edge of the main wing

Regards

Colin

 

[Mickc1440]

A real labour of love Colin, going to be a huge masterpiece when its finished.

 

[Bigfoot57]

Well I hope so Mick will be doing some more on it tonight something to do with some sort of ducting in the leading edge of the starboard main wing

Regards

Colin

 

[Bigfoot57]

Lancaster 1/32 Update No 26
Greetings latest update more work on the rh or starboard leading edge this time some sort of radiator ducting
1st the assembly of the radiator then marking and drilling mounting holes in the leading edge then painting the radiator and fittings which is where I am now waiting for it to dry before applying 2nd coat

Regards

Colin

 

[Bigfoot57]

Lancaster 1/32 Update No 27
Ok here we go again this time finishing off the ducting on the starboard leading edge
Once again this was a right pia trying to glue thin wire onto the leading edge and keeping the wire straight which failed miserably I might even strip it all off and redo it using my own idea which would be streched sprue using the candle method to heat it up and the pull each end at the same time producing a fine wire like apperance fillament anyway here are the pictures

Regards

Colin

 

[rtfoe]

Wow Colin, this looks like one labor of love with every part detailed.

I've just seen Hong Kong Models new intro of their 1/32 Lancaster at the recent MALCOM show and its a beauty. Only the clear fuselage and interior were displayed and according to Neil it's still WIP and will be out soon. He was thinking of stress panels for the skin but decided not to as it was a mammoth task. We couldn't find any ejector marks on the clear fuselage. I'll see if a friend has a picture of it.

Building your own from scratch makes the project more personal.

Cheers,
Richard

 

[Bigfoot57]

Lancaster 1/32 Update No 28
Pressed on with the wiring of the 2nd duct this time on the port wing this now completes this stage
I tried to keep the wires as straight as possible but it had its own ideas so as most of it will not be visible when the leading edge of the wing is added I decided to leave as is

Regards

Colin

 

[Bigfoot57]

Lancaster 1/32 Update No29

Hello again been a couple of months since last update so here’s whats progressed this time
1st was the construction of second leading edge cover followed by adding detail to the wheel well and engine attachment for starboard wing
I also had concerns of the riveting tool so i have tried something different namely a paper template of rivets drawn in word then printed out onto paper as rows
I also fashioned my own wing spar for the wheel bay as it seemed there was a shortage of these in the kit
The rivet paper templates were then glued to the spar and any white patches that appeared were painted over to improve the look
While i was at it i redid the cockpit floor as well when all are fully set will varnish to seal the paper
This system did not work well on the green so I have left that with the riveting tool impressions
Next a couple of wheel bay bulkheads were given the rivet treatment and finally 2 pieces of the main undercarriage oleons were bolted together
That’s it for this update will produce another in about a weeks time hopefully depending on how busy I am

Regards

Colin

 

[Jim R]

Hi Colin
You're dedication to this does you proud. Progress looks good and the rivet idea is a clever solution.
Jim

 

[Steve Jones]

Nice to see you back with this one. Some terrific work on the frames

 

[Bigfoot57]

Steve
I had 3 month sabbaitical whilst I built a 1/8 scale Formula 1 car for Pollux’s GB that’s now finished so it’s back to the old faithfull long way to go though so stay tuned

Regards

Colin