Fuselage is now together , now theres the problem of treating the seams without losing the raised detail. Ive done this in the past by carefully sanding up to the raised line and reinstating the rivets but this time I think im going to use a different approach (one ive also used before) . This second method involves sanding the seam as normal then using a sharp blade (not a scriber) marking the line back on . This creates a groove yes ,but it also raises the plastic either side and once painted gives the impression the raised line carries on over the seam. The rivets are also treated in the same way ,a sharp point being used to mark them which raises the plastic . The large screw heads on the engine cowling have been reinstated by using blobs of filler which will be sanded back a bit later . Heres the pics to show what i mean