scale cobble stone,s ?

[monica]

need a little help with what dose seam right for 1/6 scale cobble stone,s

I was thing in the rage of 25mm to 35mm,?

or 15mm to 25mm ?

as were i live we dont have any old lane ways or road edges that use them ,

any help greatly appreciated,

 

[downscale model art]

dried peas set in filler?

 

[tommy1drop]

Hi Monica I would say that if you made them at the sizes you have listed you wouldn`t be far wrong, what you have to remember is that cobblestones wouldn`t necessarily be all the same size, hope that helps.

 

[Ian M]

Basically cobbles are hand cut with hammer and chisel, We have loads over here.

Here is a photo I snapped on Tuesday, With my size 10 for a bit of scale

View attachment 95635

As you can see they'er a good mish mash of sizes, in both length and width. Made from granite. Conveniently these are wet so you can see the colours as well!
Hope this is some help.

Ian M

 

[monica]

ta guys for the info,been of great help,

so i will work off a 3/4 by a foot going off Ian size 10 runner,s :rolleyes: o_O

so about the 15/20 and and mix it up with a few bigger and small ones should be fine Tommy