So going out on a limb here and I am guessing that FDM is not Forbundet Dansk Motorister og DLP is not Dansk Landbrug Produktion...\ said:So here again, Eddy has it right, if you want to make molds to cast in resin, you can use an FDM print and then use silicone as a mold, but to do so, you'd need a lot of post-processing on your print before it can be casted. You could also use a DLP printer which can be timesaving as you can directly print in resin (but smaller) at a much higher resolution.
You are going to have to be a bit more "newbie friendly"
Ian M