- Joined
- Apr 28, 2018
- Messages
- 10,861
- Points
- 113
- First Name
- Jakko
What I thought would be a quick and easy little build turned into a bit more involved than I had thought, but it’s finished now. (See here for the build part of this.)
![fullsizeoutput_18d3.jpeg fullsizeoutput_18d3.jpeg](https://www.scale-models.co.uk/data/attachments/187/187504-ee5b6a2785f7e5c6b878ecd883ff1067.jpg)
![fullsizeoutput_18d4.jpeg fullsizeoutput_18d4.jpeg](https://www.scale-models.co.uk/data/attachments/187/187505-8314cf71af9e9e8017e6fb6ff68bb56c.jpg)
![fullsizeoutput_18d5.jpeg fullsizeoutput_18d5.jpeg](https://www.scale-models.co.uk/data/attachments/187/187506-3a2adf46631c02b373660bb743bd56a2.jpg)
![fullsizeoutput_18d6.jpeg fullsizeoutput_18d6.jpeg](https://www.scale-models.co.uk/data/attachments/187/187507-bb0d354f23256645c2de7f831ea25a3d.jpg)
![fullsizeoutput_18d7.jpeg fullsizeoutput_18d7.jpeg](https://www.scale-models.co.uk/data/attachments/187/187508-718abac910d0c40aa9e5fd09cb2b5a3f.jpg)
![fullsizeoutput_18d8.jpeg fullsizeoutput_18d8.jpeg](https://www.scale-models.co.uk/data/attachments/187/187509-8ca49e60e726c222b48cb3a270e8f981.jpg)
![fullsizeoutput_18d9.jpeg fullsizeoutput_18d9.jpeg](https://www.scale-models.co.uk/data/attachments/187/187510-8e9728644d4df3b9fc609df887c889ec.jpg)
![fullsizeoutput_18da.jpeg fullsizeoutput_18da.jpeg](https://www.scale-models.co.uk/data/attachments/187/187511-c695b5e8104ee83e04e0014c02056c37.jpg)
![fullsizeoutput_18db.jpeg fullsizeoutput_18db.jpeg](https://www.scale-models.co.uk/data/attachments/187/187512-11478d0737405ba810182cf8e581e282.jpg)
From photos, BATUS vehicles seem to be kept fairly clean and in good condition, other than a layer of dust on mainly the undersides, so all I did after what’s shown in the build thread, was to spray the dust on with Tamiya XF-57 Buff, and also use that to paint in the threads of the tyres before applying black onto the raised bits again.
The figures — as I’m sure many will recognise — are from the old Tamiya Chieftain kit, and they fit pretty well in this vehicle. The commander only needed a bit of plastic card stuck to the bottom of the turret ring for his hand to sit perfectly on the hatch, for example. I didn’t spend a lot of time painting them: just the skin tones, camouflage pattern and details, then a quick shade job with a dark grey glaze. I had most trouble getting them to be matt. The glaze was semi-gloss, due to being based on transparent wood paint for floors etc., and my first attempt with Humbrol Matt Cote that I thought I had very thoroughly stirred, turned out just as semi-glossy as the figures had been before applying that. I then sprayed on Army Painter matt varnish, which reduced the shine, but still not as far as I would have liked. (I want GW Purity Seal from 10–15 years ago back …)
And I still didn’t manage to get all four wheels on the ground!
(Oh, and I think I never did publicly thank @papa 695 for the fire extinguishers — thanks
)
![fullsizeoutput_18d3.jpeg fullsizeoutput_18d3.jpeg](https://www.scale-models.co.uk/data/attachments/187/187504-ee5b6a2785f7e5c6b878ecd883ff1067.jpg)
![fullsizeoutput_18d4.jpeg fullsizeoutput_18d4.jpeg](https://www.scale-models.co.uk/data/attachments/187/187505-8314cf71af9e9e8017e6fb6ff68bb56c.jpg)
![fullsizeoutput_18d5.jpeg fullsizeoutput_18d5.jpeg](https://www.scale-models.co.uk/data/attachments/187/187506-3a2adf46631c02b373660bb743bd56a2.jpg)
![fullsizeoutput_18d6.jpeg fullsizeoutput_18d6.jpeg](https://www.scale-models.co.uk/data/attachments/187/187507-bb0d354f23256645c2de7f831ea25a3d.jpg)
![fullsizeoutput_18d7.jpeg fullsizeoutput_18d7.jpeg](https://www.scale-models.co.uk/data/attachments/187/187508-718abac910d0c40aa9e5fd09cb2b5a3f.jpg)
![fullsizeoutput_18d8.jpeg fullsizeoutput_18d8.jpeg](https://www.scale-models.co.uk/data/attachments/187/187509-8ca49e60e726c222b48cb3a270e8f981.jpg)
![fullsizeoutput_18d9.jpeg fullsizeoutput_18d9.jpeg](https://www.scale-models.co.uk/data/attachments/187/187510-8e9728644d4df3b9fc609df887c889ec.jpg)
![fullsizeoutput_18da.jpeg fullsizeoutput_18da.jpeg](https://www.scale-models.co.uk/data/attachments/187/187511-c695b5e8104ee83e04e0014c02056c37.jpg)
![fullsizeoutput_18db.jpeg fullsizeoutput_18db.jpeg](https://www.scale-models.co.uk/data/attachments/187/187512-11478d0737405ba810182cf8e581e282.jpg)
From photos, BATUS vehicles seem to be kept fairly clean and in good condition, other than a layer of dust on mainly the undersides, so all I did after what’s shown in the build thread, was to spray the dust on with Tamiya XF-57 Buff, and also use that to paint in the threads of the tyres before applying black onto the raised bits again.
The figures — as I’m sure many will recognise — are from the old Tamiya Chieftain kit, and they fit pretty well in this vehicle. The commander only needed a bit of plastic card stuck to the bottom of the turret ring for his hand to sit perfectly on the hatch, for example. I didn’t spend a lot of time painting them: just the skin tones, camouflage pattern and details, then a quick shade job with a dark grey glaze. I had most trouble getting them to be matt. The glaze was semi-gloss, due to being based on transparent wood paint for floors etc., and my first attempt with Humbrol Matt Cote that I thought I had very thoroughly stirred, turned out just as semi-glossy as the figures had been before applying that. I then sprayed on Army Painter matt varnish, which reduced the shine, but still not as far as I would have liked. (I want GW Purity Seal from 10–15 years ago back …)
And I still didn’t manage to get all four wheels on the ground!
(Oh, and I think I never did publicly thank @papa 695 for the fire extinguishers — thanks
![Smiling3 :smiling3: :smiling3:](/smiles/Smiling3.png)