Ok will try again. I did mix in the cup so perhaps do outsideI'm sure you did but it needs shaking/mixing really, really well. Maybe it's a duff bottle Can't help beyond that, sorry.
Would Vallejo thinner and flow improver work ?VMS Varnish is great but takes a little to get used to. This is what works for me very well. One or two drops of Acrylic Thinner added and then no more than 2 drops of flow improver, then run through a 0.4mm at 20PSI BUT with a light trigger action, don't pull full back, works a charm.
Yes both are perfect but only a few drops of each, you are not doing what you would normally with other paint systems, i.e. get it milky thin. In truth its does work without either however I find a few drops of each just helps things along. The light trigger action is the key.Would Vallejo thinner and flow improver work ?
For FULL Forum access you can upgrade your account here UPGRADE