S
steve scan
Guest
Finally finished this one, in all honesty I did not enjoy this build, very fussy engineering, too much of the interior was in brass when plastic would have been better, I put it away several times intending to bin on the last but could not resist trying one more time, trying to get the body shell on to the chassis resulted in the interior etched plates etc. pinging off so I had to cut large parts of them off until the body shell would sit some where like correctly, then on one of my trial fits it clicked to place and I did not want to pull it off again, luckily I had added the interior detail though had not done any weathering, so I thought sod it I will have everything buttoned up, then as I was working on the exterior the front passenger seat came adrift!! luckily with a certain amount of dexterity working through the forward gun position I managed to get it re secured, soon after the forward stowage rack came adrift!!!!! this was made of two pieces of brass and was impossible to re secure so I threw it all in it the box and placed it outside for the bin. The following morning I headed off to the bin with it but made the mistake of opening the box and lo and behold back I went to the workshop, managed to remove it through said forward gun opening but left some white pant flecks on the interior of the windows, also ended up having to scratch build many of the handrails and the rear view mirror brackets, Tamiya masking tape straps and plastic/etch tool brackets, but hey ho, so here she is the most challenging one I can remember doing should have been a lot better but still a great looking vehicle,
Thanks for looking, Steve.
Thanks for looking, Steve.