More progress.
The canopy fitted very well. I did have some minor adjustments to make to the inner frame but nothing to worry about.
Reviews suggest that the top inserts are a little too wide for the fuselage. Solutions tried include using plastic sheet to make the fuselage wider.
did not do that and just cemented the two fuselage sides into place. I ended up with a gap in the two short sections of top fuselage, behind the canopy and at the tail. I filled these with Vallejo Plastic Putty and after letting it fully cure I sanded it and then applied some Mr Dissolved Putty to the join. It will need a little light sanding tomorrow once that has cured. You can also see in the picture that there is no gap with the fuselage sides fitting snugly together in the middle section. As you can see I did nothing to correct the alleged wider insert…
I say alleged, because a test fit below shows the inserts fitting perfectly. And are exactly the right width! Note that in the picture they are just loosely placed
So, I am not sure why reviews say the inserts are too wide!
Below you can see that I have started work on the bomb bay doors and tail sections.